BE THE ENVY OF THE RIDERS AT YOUR SPOT!
Rock solid stability, directional float, pivotal turning and effortless re-launch highlight the Envy’s “beyond delta” design for all around performance.This ultra lightweight three- strut platform gives light, responsive bar feel with impulse pivotal turning.
The Envy’s flight characteristics blend to produce a distinct “set it and forget it” feel.This makes it the perfect kite for everything from progressive wave riding to kite low freestyle domination.
Land a jump a bit too hot, under run the kite in a bottom turn… forget about it! The Envy’s lightweight design allows the kite to float directionally, enabling you to forget about the kite and concentrate on the important issues: making grabs, spotting landings and reading waves straight into the pit
FEATURES DETAILS
MAX FLOW INFLATION SYSTEM ONE PUMP.
The future is now, and this future is inflated quicker and easier by the LF Max Flow Valve. Imagine a kite that inflates in 40% less time, getting you to the water faster and leaving your friends still pumping on the beach.The LF Max Flow valve can bring it, and only the full range of LF kites has it! This new one way high airflow valve mixed with our completely redesigned, gauge-equipped pump will change your life. Once you go Max Flow, you never go back!
CPR CONTROL SYSTEM EQUIPPED 100% DEPOWER – CENTER LINE PUSH RELEASE
The LF CPR release allows riders an instant and effortless safety release of the kite, with either hand, from the front or back of the bar, to either the 100% de-power flag line or 90% de-power mainline leash options.
SUPERIOR QUALITY CANOPY MATERIAL TEIJIN RIPSTOP T9600
When most of the kiteboarding brands out there stopped using this very high end material due to cost increases, we at Liquid Force stood our ground! We strongly believe that the use of Teijn Ripstop T9600 is essential to high quality kite design. Your kite will repeatedly perform like the day it was pulled out of the plastic and hold a much higher resale value.
BOMB PROOF CONSTRUCTION GLUED AND STITCHED PANEL ASSEMBLY
The entire panel layout of our kites is glued and stitched using an overlapped seam assembly. This construction has proven throughout the years to be the strongest on the market. We have also discovered the perfect Dacron reinforcement to weight ratio to ensure the highest quality for your investment. Our signature molded EVA leading edge bumpers are light, strong and will protect your LE during self-launch, hard crashes, snow re-launch, and normal everyday wear and tear.
WINGTIPS, UNIQUE LF DIAMOND WINGTIP DESIGN
While most other kite designs on the market only use round wingtips, at Liquid force we believe in our unique Diamond Wingtip design. The Diamond wingtip not only provides huge de-power and easier prelaunch over traditional curved wingtips, but provides a rigid structure as well as instant and predictable kite response. The LF Diamond Wingtip also provides smooth, constant pull and power through turns while still effectively de-powering the kite when needed.Bomb Proof Construction, Glue and Stiched Panel Assembly
REINFORCED LEADING EDGE STRUCTURE DOUBLE LAYER LE CONSTRUCTION
When crashing at full power, no other part of the kite absorbs as much impact as the leading edge, specifically the center of the leading edge. Our center leading edge segments are beefed up by doubling the amount of Dacron used in production, but only where it’s truly needed. This will not increase the weight of the LE but will give your kite the ability to hit the water hard all day, worry free.
STRUTS ANGLED JET STRUT ENDS DESIGN
Our angled Jet Struts prevent any of the bridles from getting stuck at the end of the strut during intensive water prelaunch. Reliability is the word!
BRIDLES SYSTEM USB 2.0. – ULTRA STABLE BRIDLE
A reliable bridle is a primary focus of kite design at Liquid Force. The LF USB 2.0 Bridle is a Proven LF cascade SLE bridle system with one static wingtip pulley. Instant depower, re-launch and stability is the #1 goal.
Edge: Board
From the first time you get on a board with a kite to air transitions you are guaranteed good times with the Edge. The Edge uses an asymmetrical bottom contour pushed slightly closer to the heel side edge to make it easy to find your sweet spot for upwind mastery.
Combine this with a rounded toe side edge and hang-up in the chop is eliminated. A confidence building board that will take you beyond mowing the lawn to hard carves and lofty airs.
EDGE FEATURES
- Liquid Rail, Urethane Rail
- Bottom Contour Shape
- Double Concave to Double Channel Bottom Contours
- Custom Slot Tip/Tail Design
- Liquid Rail Sidewall Construction
- Precision CNC Wood/PVC Foam Combination Core
- LF Competition Flex Profile
- Integrated “Thumb Rail” Deck Contours
- Top and Bottom Graphic Treatments